What is calibration?
Calibration is the process of comparing the value shown by a measuring instrument with a reference traceable to national or international standards under defined conditions, and documenting the difference (deviation) together with the measurement uncertainty.
For example, if a pressure gauge reads 10 bar, calibration measures what the pressure really is using a more accurate reference. The result shows how accurately the instrument measures and how much it deviates at each point.
Calibration shows whether the instrument measures correctly. Correcting the instrument (adjustment) and deciding whether the result is acceptable (verification) are separate activities.
Why is calibration necessary?
Measuring instruments drift with use, environment and time. When the drift goes unnoticed, decisions are made on wrong data.
Reliable measurement
An instrument that measures wrongly can make a good product look defective and a defective one look good. Regular calibration reduces this risk.
Standards and customer requirements
Systems such as ISO 9001, IATF 16949 and ISO/IEC 17025 generally require instruments that affect measurement results to be calibrated with traceability.
Cost and scrap control
When deviation is caught early, the costs of scrap, rework, returns and recalls go down.
Safety
Wrong measurement of quantities such as pressure, torque and force can directly affect equipment and worker safety.
How is calibration done?
- Step1
Instrument intake and pre-check
The instrument is identified, checked visually and functionally, and the suitable calibration method is chosen.
- Step2
Environmental conditions
Measurements are made in the laboratory or on site, with conditions such as temperature and humidity monitored.
- Step3
Comparison with the reference
The values shown by the instrument are compared with traceable reference standards at defined points across its range.
- Step4
Uncertainty calculation
Deviations and measurement uncertainty are calculated using the methods defined by the standard.
- Step5
Certificate
The results are reported in the calibration certificate.
What does a calibration certificate contain?
A calibration certificate that complies with ISO/IEC 17025 generally contains the following:
- Identification of the instrument (make, model, serial number)
- Date and place of calibration
- Reference standards used and the traceability chain
- Measurement results and expanded measurement uncertainty
- Environmental conditions during calibration
- Accreditation mark and certificate number
The certificate is your proof, in quality audits and in customer or authority requests, that the instrument was calibrated with traceability.
What does accredited calibration mean?
Accreditation means that the technical competence of a laboratory is assessed and confirmed by an independent body against ISO/IEC 17025. In Türkiye this body is TÜRKAK (the Turkish Accreditation Agency).
System Calibration is a calibration laboratory accredited by TÜRKAK under accreditation number AB-0130-K. Certificates issued within the TÜRKAK accreditation are also recognised by accreditation bodies in other countries under the ILAC MRA (International Laboratory Accreditation Cooperation Mutual Recognition Arrangement).
Your customers and auditors often ask for a certificate from an accredited laboratory. With non-accredited calibration, the laboratory's competence has not been independently documented.
View our documents →How often should calibration be done?
There is no single interval that suits everyone. The calibration interval is set on a risk basis by considering the following factors together:
- The instrument manufacturer's recommendations
- Frequency of use and working environment
- Drift trend in previous calibration results
- How critical the measurement is for the product or process
- Quality management system, regulations and customer requirements
In practice, a common starting point is 12 months. A shorter interval can be set for heavily used or critical instruments, and a longer one for instruments whose results remain stable.
The difference between calibration, adjustment and verification
Calibration
Shows the difference between the value displayed by the instrument and the reference, together with the measurement uncertainty. It does not accept or reject the instrument.
Adjustment
An intervention made to bring the instrument's indication closer to the reference. Calibration is repeated after adjustment.
Verification
Evaluating whether the calibration results meet a predefined acceptance criterion (tolerance).
Which instruments are calibrated?
Any instrument that makes measurements can fall within calibration. System Calibration provides services in 12 measurement fields under its TÜRKAK accreditation. Choose your instrument's field to see the scope:
Frequently asked
What is calibration?
Calibration is comparing the value shown by a measuring instrument with a traceable reference and documenting the deviation together with the measurement uncertainty.
Why is calibration done?
It is done to be sure the instrument measures correctly, to meet quality system and customer requirements, and to reduce the cost and safety risks of wrong measurements.
How often should calibration be done?
There is no single interval; it depends on the manufacturer's recommendation, frequency of use, previous results and how critical the measurement is. A common starting point is 12 months.
Are calibration and adjustment the same thing?
No. Calibration shows how much the instrument deviates; adjustment is an intervention to bring it closer to the reference. Calibration is repeated after adjustment.
What does accredited calibration mean?
It means the competence of the calibrating laboratory has been confirmed by an independent body such as TÜRKAK against ISO/IEC 17025.
Let's plan the calibration of your instruments together
Get in touch for calibration at our TÜRKAK-accredited laboratory in Nilüfer, Bursa, or on site at your facility.


Türkçe